+357-25383777
info@pkinnis.com.cy
All Panel heaters with Wi-Fi from BEHA are designed and manufactured in Norway. They are based on our knowledge and experience from more than hundred years as a manufacturer of heater. The heaters are approved for use in wet rooms.
Benefits:
- Projected onto floor of set temperature
- Internal memory of set temperature
- Can be used with or without the app
- 1.5m cable and plug
- Thermal fuse for overheating
- Steel front
- Environmentally friendly heater – no dust burning
- Certified for use in wet rooms IP24
- Electronic thermostat
- 5 Years WarranTY
SPECIFICATIONS
PV15 WI-FI Convector Heater
Technical Specifications
| Watt | 1500W |
| Width | 117.5 cm |
| Height | 40 cm |
| Depth (incl wall bracket) | 8,3 cm |
| Distance between wall brackets | 61 cm |
| Colour | White |
| Accuracy of the thermostat | 0,2°C at 20°C room temperature |
| Front panel’s Surface temperature | Maximum 80°C at 20°C room temperature |
| Clear distance below the heater | 10 cm |
| Clear distance sideways | 2 cm |
| Clear distance above the heater | 10 cm |
| Delivered with 1,5m long cable with plug | |
| 220 – 240 volt | |
| On/off switch and electronic thermostat | |
| Double insulated | |
| Splash security IP24 (suitable for wet areas) | |
| The wall-frame depth 3,3 cm | |
Width |
117.5 cm |
Height |
40 cm |
Depth (incl wall bracket) |
8,3 cm |
Distance between wall brackets |
61 cm |
Copyright © 2022 Petros Kinnis. Web Development By 
.
